Rear Seat Assembly Installation Details
1 - Plugs; 2 - Rear bolts; 3 - Front bolts; 4 - Console; 5 - Gas-filled damper; 6 - Assembly pliers; X54/23 - Left seat wiring connector; X54/24 - Right seat wiring connector
1. Remove the decorative plugs (1).
2. On models with the corresponding configuration (code H11), disconnect the contact connectors (X54/33 and X54/24) seat heating wiring.
3. Unscrew the bolts (2) and, using special pliers (6), disconnect the gas-filled dampers (5) - the stops must be in an unloaded state when disconnecting.
4. Loosen and remove the front bolts (3).
5. Remove the rear seat.
6. If necessary, remove the console (4).
7. Installation is carried out in reverse order.