Contents: Removal ↡ Installation ↡
Removal
1. Remove the seal from the crossmember trim.
2. Press the trim back by prying it up with a plastic wedge. Try to install the wedge as close as possible to the trim fastening clips. The trim is fastened on both sides with four clips.
3. Pass the seat belt strap through the slot in the trim and remove it.
Installation
4. Secure the trim with clamps to the ceiling crossbar.
(Original published on the website: MercedesMAN.ru)
5. Replace the trim gasket, ensuring that the gasket is tightly seated against the trim.