Removing
1. Using a plastic wedge, carefully press out the locking tabs 1 of the cover on both sides and lift the cover 3 (see illustration). This will release the locking tabs 8 (see illustration 23.3).
2. Remove cover 3 from the rear window by lowering (see illustration 23.1).
By setting
3. Fasten the cover 3 with the bottom side, inserting the stops 8 into the mount, and then push the cover against the rear window (see illustration). Make sure that the protrusions 4 go into the fasteners 5 at the same time.
4. Insert the stops 1 into the fasteners 6 and push the cover 3 until the tabs lock into place with a distinct click (see illustration 23.3).
5. Make sure that the protrusions 7 on the rear door lining fit into the holes 8 on the cover 3 (see illustration 23.3).