Contents: Engine ↡ Gearbox, final drive ↡ Suspension and steering ↡ Brakes, tires, wheels ↡ Body, interior ↡ Electrical equipment ↡ Additional works ↡
The driver is notified and maintenance dates are monitored by the computer program Active Service System, or "ASSYST" for short.
Service dates are displayed on the instrument cluster display. The first message about the service date appears approximately 3,000 km before the date.
Example of information displayed on the instrument panel display:
- means that the vehicle's low-volume service period begins after 2900 kilometers.
- means that after 2900 kilometers the time comes for maintenance, which involves a large amount of work.
The amount of work depends on the mileage since the last "major" maintenance. If the mileage since then is less than 22,000 km, then only the minimum amount of work or all the work indicated in the plan by the "•" icon needs to be performed.
If the mileage exceeds 22,000 km, work is carried out according to the "big" plan or all plan items marked with the "•" and "•" icons.
As part of the maintenance, additional work marked with the "•" symbol must also be carried out, especially in cases where, after these works have been carried out, the vehicle has covered the above-mentioned number of kilometers or the maintenance deadline has arrived but the mileage is less than the mentioned number of kilometers.
After performing service work, the previous message on the instrument cluster display must be deleted and the date of the next maintenance must be entered.
Engine
Change the oil and oil filter.
Cooling and heating systems. Check the fluid level, antifreeze concentration. Perform a visual check of the radiator for leaks and make sure there is no contamination on the outer surface of the radiator.
Engine. Perform a visual inspection for leaks, damage, and chafing of the pipes.
V-belt. Check condition.
Exhaust system. Check the condition and make sure there is no damage.
Gearbox, final drive
CV joint covers. Perform a visual inspection of the condition.
Gearbox and differential. Perform a visual inspection for leaks.
Suspension and steering
Power steering hydraulic drive. Check the fluid level and top up if necessary. If the amount of fluid in the reservoir has decreased significantly, find out the reason.
Front suspension ball joints. Check the play and their fastening, as well as the condition of the dust caps.
Steering. Check the tightness and condition of the steering cuffs, as well as the play of the tie rod ends.
Cars up to and including identification number 515389. Check the play of the trailing arm support.
VANEO vehicles. Check the tightness of the shock absorbers.
Brakes, tires, wheels
Tires. Check the tire pressure, including the spare tire.
Tire sealant "TIREFIT". If included, check expiration date and renew if necessary.
Brake system. Visually check the tightness and condition of the pipes, hoses, brake cylinders and their connections. Check the brake fluid level.
Tires. Check the remaining tread depth of the tires, including the spare tire, and the tire pressure. Check the wear and damage of the tires.
Brakes. Check the thickness of the brake pads on the front right wheel, as well as the condition of the brake disc on this wheel, by removing the wheel.
Caution! For vehicles with rear wheel brake discs, also check the remaining thickness of the brake linings on the rear right wheel and the condition of the brake disc on this wheel.
Rear brake drums. Check the thickness of the rear brake pads.
Parking brake. Check operation.
Body, interior
Hood. Lubricate the hinges.
Seat belts and their buckles. Check the condition and functionality.
Cars without air conditioning. Replace the dust filter (cabin filter).
Attention! The dust filter should also be replaced in cars with air conditioning manufactured before 9/98, where the activated carbon filter has not been replaced with a combined filter.
Cars with air conditioning manufactured since 9/98. Replace the combined dust filter.
Electrical equipment
Signal lights, symbol lights and interior and trunk lights. Check for proper operation.
Outdoor lighting. Check functionality.
Light signal, hazard warning lights, direction indicators. Check functionality.
Sound signal. Check functionality.
Front and rear window wipers. Check functionality.
Windscreen and headlight washers. Check the level, concentration of the washing fluid and the functionality of the washers, as well as the position of the jets.
Delete the previous information and enter the date of the next vehicle service into the service notification and control device.
Headlights. Check the headlight angle.
Headlight range control. Check for proper operation.
Windshield wiper blade. Replace.
Rear window wiper blade. Check condition.
Battery. Check the electrolyte level.
Additional works
At the first service (one-time)
A210. Change oil in manual transmission 716.505.
Once after 30,000 kilometers
Parking brake. Adjust the parking brake cable equalizer.
Every 30,000 km or 2 years after the last service
Towing hitch with removable towbar and automatic locking. Lubricate and check for functionality, clean if necessary.
Once after 50,000 km of mileage or two years after the last service
Cars with air conditioning manufactured before 9/98. Replace the activated carbon filter with a combined one.
Every two years (preferably in spring)
Brake fluid. Replace.
Body. Check the condition of the paintwork, as well as the condition of the body itself, and make sure there is no corrosion.
After 60,000 km or four years after the last replacement
Gasoline-powered vehicles: Replace spark plugs.
After 80,000 km or four years after the last replacement
Replace the fuel filter.
Replace the air filter.
VANEO and cars with automatic transmission. Change transmission oil and filter (the work is carried out in the workshop).
After 250,000 km or 15 years after the last replacement
Replace the coolant.