Removing
1. Turn off the ignition and remove the key from the lock.
2. Unlock the washer reservoir, remove it and drain the washer fluid.
3. Disconnect the pump motor power plug (see arrow in illustration), pressing the latch leash with a screwdriver.
4. Disconnect the washer fluid supply hoses from the washer pump.
5. Remove the pump motor by pushing it up.
Installation
6. Install the motor in its mounting location.
7. Connect the cleaning fluid supply hoses to the pump.
8. Connect the power plug of the washer pump motor.
9. Install the washer reservoir in place by inserting its protrusion into the mounting hole.
10. Fix the washer reservoir and fill it with washing liquid.
11. Check washer function.