Removing
1. Remove the dust filter, see relevant chapter.
2. Remove the decorative frame of the heater / air conditioner unit by depressing the four locking tabs.
3. Unscrew the eight screws that secure the cover over the motor and remove it.
4. Unscrew a bolt of fastening of the electric motor.
5. Disconnect the motor power plug and remove the motor. When removing the electric motor, lower the hood. Do not place the fan motor on top of the diffuser.
Installation
6. Install the motor in place and secure with the bolt.
7. Connect the power plug and fix it.
8. Replace the motor cover and secure with eight screws.
9. Place the frame and fix it.
10. Replace the dust filter, see relevant chapter.