Removal
1. Fold handle 1 down, lift covers 2 up, unscrew screws 3 located underneath them and detach the handle above the door (see illustration).
2. Remove seal 4 on the front pillar from trim 5 (see illustration).
3. Pry up the trim 5 with a plastic wedge and carefully release it from the fasteners (see illustration).
Attention! Place the plastic wedge under the lining as close to the clamps as possible 6 (see illustration 10.3).
4. Release the top of the A-pillar trim from under the B-pillar trim.
Article text obtained from the website [MERCEDESMAN.ru]
5. Release the bottom of the front pillar trim and from the seal 7 of the windshield (see illustration 10.3).
Caution: The A-pillar trim is held under the windshield seal by split clips.
Installation of the front pillar trim is performed in the reverse order of removal.
Before installation, inspect the trim fasteners and replace damaged ones with new ones.