2. Remove the center console cover, see relevant chapter.
3. Remove the lower cover 1 of the center console by unscrewing one bolt 2 each from the left and right sides (see illustration). After that, slide the cover back and release it from the fasteners 3.
4. Remove the bottom cover 1 of the central console by unscrewing one bolt each from the left and right sides.
Attention! The illustration shows the cover with the rear part 4 of the center console not removed (see illustration 6.3).
5. Unscrew four bolts of fastening of the central console over the block of switches of a heater. Remove the bolts together with the washers.
6. Unscrew from below from the left and right parties on one bolt.
7. Remove the lower part of the center console and release it from the upper brackets.
8. Remove the central console.
The console is installed in the reverse order of removal.