Clutch slave cylinder installation details
21 - bleed valve
1. The installation details of the clutch slave cylinder are shown in the illustration, to which all references in the text refer.
2. Disconnect from the slave cylinder (1) hydraulic line (19), immediately plugging its open end.
3. Turn out fixing bolts (20) and remove the slave cylinder (1) with plastic washer (2).
4. Installation is carried out in the reverse order, before installation, lubricate the cylinder pusher rod with grease and make sure that the forked clutch release lever enters the receiving socket correctly.
5. Finally, bleed the hydraulic circuit (see Section Removal of air from the hydraulic path of the clutch drive).