Attention! All sealing elements must be replaced without fail!
Details of installation of the receiver-dryer A/V
1 - Receiver-drier
2 - Service valve of the high pressure line
3 - Mounting clamp
4 - Pressure lines
1. Under the conditions of a specialized service station, discharge the A/C system.
2. Disconnect from receiver dryer (1) and set aside pressure lines (4), - prepare replacement sealing rings.
3. Release the clamp (3) and, pulling up, release the receiver-drier from it.
Attention! The receiver-drier must be replaced every time the refrigeration path is opened!
4. Installation is carried out in the reverse order.
5. In conclusion, make sure that the K / V system is functioning properly and that there are no signs of the development of leaks from its path.