Upper shock absorber design | Location of the lower support of the rear shock absorber |
1. Loosen the nut (1), then remove the plate (2) with rubber bushing (3) and release the shock absorber from the upper support bracket (4).
2. Remove the holder from the shock absorber (5 and 8), rubber bearing (6) and spacer (7).
3. Loosen the nut, remove the bolt (arrow) and remove the shock absorber from the lower support.
4. Assess the condition of the rubber components, replace the failed elements.
5. Inspect the shock absorber for signs of leakage through the cuffs of the working rod, if necessary, prepare replacement assemblies.
6. Installation is carried out in the reverse order. Make sure the fasteners are tightened to the correct torque.