Details of installation of the electric motor of the drive of the exhaust window
1. Details of the installation of the electric motor of the drive of the exhaust vent are shown in the resist. an illustration to which all references in the text refer.
2. Remove the rear roof trim panel.
3. Disconnect the wiring connector and remove the screws (1) fastening of the drive motor assembly (M21/8 or M21/9).
4. Remove the cover (2) with guide (3).
5. Remove from guide (3) drive motor assembly (M21/8 or M21/9).
6. Installation is carried out in the reverse order - follow the correct fit of the distance sleeve and damper.
7. In conclusion, turn on the ignition and check the operation of the vent drive.