Installation details of the front side airbag modules (on the example of the driver's door module)
1. The installation details of the front side airbag modules are shown in the illustration, to which all references in the text refer.
2. Disconnect the negative cable from the battery.
3. Remove the inner upholstery of the corresponding front door (see chapter Body).
4. Drill out the fixing rivets (1).
5. Turn out bolts (2) and remove the airbag module, separating the electrical wiring from it (3).
6. Installation is carried out in the reverse order.
7. Finally, diagnose SRS using special equipment (seek help from car service specialists).
Rear side airbags
Installation details of the front side airbag modules (using the right rear door module as an example)
1. The installation details of the rear side airbag modules are shown in the illustration, to which all references in the text refer.
2. Disconnect the negative cable from the battery.
3. Remove the inner upholstery of the corresponding rear door (see chapter Body).
4. Disconnect the connector (2) electrical wiring fuse airbag gas generator.
5. Drill out the fixing rivets (1) and remove the airbag module (3).
6. Installation is carried out in the reverse order.
7. Finally, diagnose SRS using special equipment (seek help from car service specialists).