The brake light switch is located above the brake pedal on its bracket (see illustration 15.3).
Removing
2. Turn off the ignition.
3. Disconnect plug 1 from brake light switch 2 (see illustration).
4. Squeeze the latch 1, turn the switch to the right and remove it from the mount (see illustration).
Installation
5. Pull out the pusher 2 of the new brake light switch as far as it will go. This will be the max move «A» pusher (see illustration 15.4).
6. Press a brake pedal against the stop. Insert the switch into place and screw it in until it is secured by the latch 1 (see illustration 15.4).
7. Release the brake pedal. In this case, the switch pusher will self-adjust.
8. Connect the brake light switch plug.
9. Make sure that the brake lights come on even with slight pressure on the brake pedal.