Installation details of diesel engine glow plugs
1. Details of the installation of glow plugs are shown in the illustration, to which all references in the text refer.
2. Start the engine and warm it up to normal operating temperature (about 80°С).
Attention! Spark plugs should only be turned out after the cylinder head has completely warmed up!
3. Stop the engine.
4. Disconnect from a fuel distributive highway going to TNVD a returnable fuel line.
5. Disconnect the wiring (3) (see Section Checking glow plugs) and with a special tool (HAZET 4760-1) turn out the candles (R9).
6. Installation is carried out in the reverse order - do not forget to pre-clean the candle niches with a special Perlon brush with a diameter of 10 or 6 mm.
7. Finally, start the engine and check the power system for signs of leaks.