Contents: Front doors ↡ Rear doors ↡
Note: It would be wiser to entrust this work to car service specialists.
Front doors
Front door window regulator drive electric motor installation details
1. The installation details of the electric motor for the front door window regulator are shown in the illustration, to which all references in the text refer.
2. Remove the inner door trim and separate the insulating film from the door frame (see Chapter Body).
3. Loosen the mounting screws (1), disconnect the electrical wiring connector (2) and remove the window regulator drive motor assembly (M10/3 or M10/4).
4. Installation is carried out in the reverse order - do not forget to lightly lubricate the drive gear, if necessary, replace the insulating film of the door frame.
Rear doors
Rear door window regulator drive electric motor installation details
Original material on the website MercedesMAN.ru
1. The installation details of the rear door window regulator drive electric motor are shown in the illustration, to which all references in the text refer.
2. Remove the window regulator mechanism (2) from the door assembly.
3. Loosen the mounting screws (1) and remove the drive motor assembly (M10/5 or M10/6).
4. Installation is carried out in reverse order, do not forget to lightly lubricate the motor gear.