Contents: Removal the fog light (version 2) ↡ Replacing the fog light bulb…↡ Removal and installation ↡ Replacing the lamp ↡
Fog light and bulb installation details (version 1)
1 - Lid; 2 - Bolt; 3 - Headlight housing; 4 - Lamp; 5 - Wiring connector pin; 6 - Locking mechanism; 7 - Reflector
Removal the fog light (version 2)
Replacing the fog light bulb (version 2)
9 — Lamp
10 - Locking tabs
The corresponding illustrative material is presented in the illustrations, to which all references found in the text refer.
Removal and installation
1. The details of the installation of fog lights are shown in the illustration, to which all references in the text refer.
2. Remove the cover (1) from the bumper - try not to damage the locking tabs.
3. Unscrew the bolt (2).
4. Release the fog light assembly from its mounting socket in the front bumper.
Article was obtained from the portal: MercedesMan
5. Installation is carried out in reverse order.
Replacing the lamp
1. Remove the cover (1) from the bumper - try not to damage the locking tabs
2. Turn counterclockwise to remove the fog light cover (3).
3. Using a suitable wedge, release the reflector (7) from the casing.
4. Disconnect the electrical wiring connector (5) and remove the lamp (4) from the back of the reflector (7), - try not to touch the lamp bulb with bare fingers (it is best to do the work wearing clean cotton gloves).
5. Installation is carried out in the reverse order - make sure that all fasteners are securely locked.