Rear light installation details
E3 - Right rear light
E4 - Left rear light
Rear light design
1 - Stop signal; 2 - Reversing light; 3 - Turn indicator; 4 - Fog Light (left lamp) /rear/parking light (right lamp)
1. The installation details of the rear lamp assemblies are shown in the illustrations, which include all references in the text.
2. Give fixing nuts (5), thread the pin (6) in support (7) and by pulling back, release the corresponding lantern assembly (E3 or E4) from its seat in the body element.
3. Disconnect the electrical wiring connector (8) and remove the headlight (E3/E4).
4. Installation is carried out in the reverse order.
5. Finally, check the proper functioning of the respective navigation/signal lights.
Replacing taillight bulbs
1. Using a screwdriver, unlock and disconnect the connector (2).
2. Squeeze the tabs (3) and remove the lamp holder.
3. Press the lamp, turn it to the left and remove it from the lamp holder.
4. Installation is carried out in the reverse order.