Overhead Console Panel Installation Details (N70)
1. Turn on the auxiliary battery and connect it to the standard battery, then disconnect the negative cable from the latter.
7 - Auxiliary battery
8 — Positive wire terminal of the module
9 — Terminal of the negative wire of the module
W10 - Battery ground
2. Pry it up from behind in two places (arrows), tilt the console panel (N70) at 45° and carefully release it from the ceiling trim
3. Disconnect the electrical wiring from the panel.
4. Installation is carried out in reverse order.
5. Finally, read the DTC codes and clear the on-board diagnostic system memory using the STAR DIAGNOSIS scanner (6511 1801 00) (See Chapter Engine electrical systems).