Removing
1. Open the hood.
2. Unscrew the four bolts 2 fastening the cover 1 of the air intake (see illustration).
3. Slide the air intake cover up and remove it by tilting the hood down.
4. Press the jet retainer 1 with a screwdriver or pliers and remove it from the mounting hole by moving it up (see illustration).
Attention! Before doing this, wrap the screwdriver with tape so as not to damage the paintwork.
5. Disconnect hose 2 for supplying washing liquid from the jet (see illustration 18.4).
Installation
6. Connect the washing fluid supply hose to the jet.
7. Install the jet in the mounting hole on the air intake cover and fix it there.
8. Install the air intake cover on the fairing and secure it with four bolts.
9. Close the hood.
10. Adjust the position of the jet.