Details of installation of individual switches of the electric drive of regulators of window regulators of back doors
1 - Cladding panel
2 — the Contact socket of an electroconducting
S21 / 15s1 - Left rear door window regulator switch
S21 / 15s2 - Right rear door window regulator switch
1. The details of setting the switches are shown in the illustration, to which all references in the text refer.
2. Remove the center console armrest cover (see chapter Body).
3. Disconnect the wiring (2) from the corresponding switch (S21/15s1 or S21/15s2).
4. Release the four latches and release the switch from the trim panel (1), pushing it out.
5. Installation is carried out in the reverse order.