Contents: Removal ↡ Installation ↡
Removal
1. Turn off the ignition.
2. Remove the engine protection, see the relevant chapter.
3. Disconnect the glow plug power wires.
Caution! Glow plugs for cylinders 2 and 3 are accessible through openings in the exhaust manifold.
4. Unscrew the glow plugs, for example using the HAZET 2530 socket head.
Installation
5. Screw in the spark plugs and tighten them to 15 Nm.
6. Connect the power wires to the spark plugs.
7. Install the engine protection, see the relevant chapter.