Sound signal — removal and installation (Mercedes-Benz A-Class W168)

Removal

1. Remove the front bumper, see the relevant chapter.

2. Disconnect plug 1 and unscrew nut 2 (see illustration).



3. Remove the high tone 4 and low tone 3 sound signal (see illustration 9.2).

Note: The low tone signal is located below the high tone signal.

Installation

4. Put the horn back in place and secure with nut 2 (see illustration 9.2).

5. Connect plug 1 (see illustration 9.2).

6. Install the bumper back in place, see the relevant chapter.