Checking and adjusting the front wheel alignment
Checking and adjusting the front wheel alignment
1. The relevant illustrative material is presented in the illustrations, to which all references found in the text refer.
2. Set the front wheels in a straight-ahead position and secure the steering wheel using a special device.
Fixing the steering wheel when checking and adjusting the front wheel alignment
(Material created based on the website: MercedesMan)
3. Make sure that the steering gear is centered correctly - in the neutral position of the rack, the installation groove of the hinge unit should be aligned with the mark on the valve assembly housing of the input unit of the rack and pinion (arrow). If necessary, adjust the position of the steering wheel by moving it by a maximum of 1 tooth.
4. To adjust the toe-in, loosen the locknuts (10f) and adjust the position of the tie rod ends (10) accordingly - make sure that the dust boots are not twisted.
Rear wheels
Checking and adjusting rear wheel alignment
Checking and adjusting rear wheel alignment
1. The relevant illustrative material is presented in the accompanying illustrations, to which all references found in the text refer.
2. Check that the axle ground clearances are adjusted correctly (see Section Checking and adjusting the ride height), make appropriate adjustments if necessary.
3. Adjustment is made using eccentric bolts (60a) on the supports for attaching the longitudinal struts (60) to the subframe (50) of the rear suspension.