Rear suspension torsion bar installation details
77 - Torsion bar; 77a - Rubber bushing; 77b - Clamp; 77c - Bolts; 78a - Connecting bolt; 78b - Bearing; 78c - Bearing; 78d - Spacer sleeve; 78e - Bearing; 78f - Bearing with nut
Note: All self-locking bolts and nuts must be replaced!
1. The details of the rear torsion bar installation are shown in the accompanying illustration, to which all references in the text refer.
2. Remove the bearing with nut (78f).
3. Unscrew the bolts (77c) of the mounting clamp (77b).
4. Remove the torsion bar (77).
5. Remove the rubber bushing (77a) from the rod.
6. Installation is carried out in the reverse order - replace defective components, ensure that the components are installed correctly (78a÷78f).
Original published on the website: MercedesMan